Hari Chand Anand & Co.

UMIT MAKINA-MA-10 | MANUAL MATTRESS PACKING MACHINE

MA-10 is a Manual Mattress Packing Machine. It firmly wraps the mattresses with a nylon sheet of variable thickness under the supervision of the operator. It ensures that the bearings are not damaged and are safe from external factors during the shipping process. The mattress packaged with MA-10 reach their final destination clean, safe, and sun damaged.

FEATURES

• User friendly touch screen panel.
• Double sealing system and can be individually adjusted.
• Including table.
• Sealing wire can be stretc hed for long lasting usage.
• 2 operation modes for different nylon microns.
• Safety sensors to project operator’s hands.

SPECIFICATION

• Dimension: 415 X 2600 X 860 mm
• Power Requirement: 220 V 1 Phase 2 Kw
• Air Pressure: 6 bar
• Total Area Required: 2600 X 2190 mm
• Weight: 290 kg

ÜmitMakina BD Series of Bonnell Spring Assembly Machine models are the cornerstone of all mattress production lines. It meticulously knits the individual bonnell coils to produce the comfortable base of the mattress. The durable knitting ensures the integrity of the mattress in the long term.

FEATURES:

• Powered by electronic system.
• Both automatic and manual operation.
• Fast and easy change of sizes with helical tech facility.
• Capable of processing varying wire diameters and spring heights.
• Helical cut and clench system.
• Low maintenance.

SPECIFICATION:

• Model: BD-30
• Spring Type: Bonnell
• Helical Wire: 1.30mm
• End Coil Outside Diameter: 68 mm – 74 mm
• Spring Wire Diameter: 1.9mm – 2.2mm
• Max. Number of Jaws: 23 jaws / 71mm
• Number of Convolution: 4 – 5 – 6
• Spring Height: 80 mm – 170 mm
• Spiral Motor Power: 1.1 Kw
• Spring Feeding Motor: 1.1 Kw
• Wire Length Setting Motor: 0.18 Kw
• Weight: 1010 Kg.
• Maximum Width: 2000 mm
• Power: 380 V 3 faz 10 A
• Total Area: 6700 mm x 2240 mm

SPECIFICATION:

• Model: BD-40
• Spring Type: Bonnell
• Helical Wire: 1.40mm
• End Coil Outside Diameter: 84 mm – 94 mm
• Spring Wire Diameter: 2.2mm – 2.4mm
• Max. Number of Jaws: 18 jaws / 98 mm
• Number of Convolution: 4 – 5 – 6
• Spring Height: 80 mm – 170 mm
• Spiral Motor Power: 1.1 Kw
• Spring Feeding Motor: 1.1 Kw
• Wire Length Setting Motor: 0.18 Kw
• Weight: 1010 Kg.
• Maximum Width: 2000 mm
• Power: 380 V 3 faz 10 A
• Total Area: 6700 mm x 2240 mm

 SPECIFICATION:

• Model: BD-50
• Spring Type: Bonnell
• Helical Wire: 1.40mm
• End Coil Outside Diameter: 76 mm – 90 mm
• Spring Wire Diameter: 2.0 mm – 2.4 mm
• Max. Number of Jaws: 19 jaws / 88mm
• Number of Convolution: 4 – 5 – 6
• Spring Height: 80 mm – 170 mm
• Spiral Motor Power: 1.1 Kw
• Spring Feeding Motor: 1.1 Kw
• Wire Length Setting Motor: 0.18 Kw
• Weight: 1010 Kg.
• Maximum Width: 2000 mm
• Power: 380 V 3 faz 10 A
• Total Area: 6700 mm x 2240 mm

OA-20 is an Automatic Mattress Packing Machine. It firmly wraps the mattresses with a nylon sheet of variable thickness. It ensures that the bearings are not damaged and are safe from external factors during the shipping process. The mattress packaged with OA-20 reach their final destination clean, safe, and undamaged.

FEATURES

• Full automatic operation capabilities and rapid rate of work .
• Servo controlled seal bars are self adjusting for all bed sizes.
• High reliability of the sealing process with continuous heat seal bars.
• Compact design and compatible for integration with conveyors.
• Double seal bars, constant heat, PID controlled.
• Upper roll storage.
• Compression system for tight wrap.
• Side trim disposal kit.
• Divan packing mode.

BK-10/20 | COMPUTERIZED QUILTING MACHINE

BK Series Quilting Sewing Machines are preferred for their ability to sew visco, latex, fiber, knitted fabric, jacquard fabric, leather, feather layers, and their unmatched ease of use. Having the ability to create any desired pattern, the machine is available in single head and double-head models. The double-head model ensures high performance while working with even thicker materials.

FEATURES:

• Suitable for mattresses, quilt covers and mattress toppers.
• Simple operation and automatic control.
• Independent sewing heads driven by servo motors.
• Heavy duty stitching easily cope with heavy materials.
• Excellent performance on a very wide range of materials.
• User friendly programming and diagnostics.
• Simple pattern selection with clear interactive touch screen.
• Wide variety of patterns.
• Pattern program.
• Exact thread break restart point.

UMIT MAKINA K-25  |  MATTERSS TAPE EDGE MACHINE

Ümit Makina K-25 Mattress Tape Edge Machine is used in the bedding industry to finish the top and bottom edges of the mattress. The machine stitches the top and bottom panels of mattress to the mattress edge and covers the raw edge with a protective tape or ribbon.

FEATURES:

• CTEC 300UB5 chain stitch sewing head up to 4.000 Rpm
• Servo driven sewing head and servo driven carriage (belt free synchronization)
• User friendly touchscreen for all settings including table control & sewing head angle
• Undertable electric supply cabinet with carriage knee control system
• Knee control or operator carrier
• Auto slowdown at corners
• Robust structure
• Extreme ease of corner turns
• Full synchronization of servo driven carriage and sewing head at take off/stop and corners to eliminate fabric shrinking
• Machine offers greater productivity, high quality edges and increased profit with minimum downtime

SPECIFICATION:

• Sewing Head: CT 300UB5/PFAFF 5625
• Sewing Head Speed: C-Tec 300UB5 : 4.000 rpm / PFAFF 5625 : 3.500 rpm
• Mattress Height: min. 5cm / max. 40cm
• Carriage Motor: 220V Servo Motor 1.000W
• Sewing Head Motor: 220V Servo Motor 750W
• Table Motor: 0.37 kw, 380 AC
• Needle: No.24
• Thread (up/down): 50/50
• Head Angle Motor: Linear Actuator 36 V 100W DC
• Control System: Servo Driven and PLC Control
• Total Area Required: 2.520 x 2.020 mm
• Weight: 682 kg

UMIT MAKINA-YP-10  PILLOW PRESS MACHINE

YP-10 Pillow Press Machine is used for pressing and vacuum packaging home textile products such as bed quilts and pillows. It is a simple-to-use machine that facilitates the positioning of home textile products in small areas while ensuring that the products are not damaged while they are being pressed and vacuumed.

FEATURES

• To press and seal any bulky textiles.
• Solves transportation and stocking problems.
• Vacuum sealing.
• Mainly used for pillows and cushions.
• High working rate and efficiency.
• User friendly touch screen panel.
• Double sealing system.
• Sealing wire can be stretched for long lasting usage.
• Automatic height adjustment.

SPECIFICATION:

• Dimension: 1000 x 1100 x 1700 mm
• Power Requirement: 220 V   1 Phase   1 Kw
• Air Pressure: 6 bar
• Total Area Required: 2000 x 7000 mm
• Weight: 1152 kg

UMIT MAKINA - BH-30/40/50 |  BONNELL SPRING COILING MACHINE

Bonnell Springs are knotted, hourglass shaped steel wire coils with a round top. Hardened steel is one of the most widely used materials for bonnell springs. BH Series Bonnell Spring Coiling Machinery shapes heated steel wires according to the desired coil spring size and number of convolutions.

FEATURES:

• PLC control system.
• Proper functioning and mass production up to 60 springs per minute.
• High tech bottom and top knotting system.
• Very simple to operate and very easy to set up.
• Soundproof Enclosure.
• Fast and easy change of spring features.
• Operates without compressed air.
• Electronic control on heat treatment system.
• Adjustable frequency modulation.

UMIT MAKINA K-10 |  Mattress Tape Edge Machine Pfaff 335 Lock Stitch Sewing Head up to 2.800 rpm

Ümit Makina K-10 Mattress Tape Edge Machine is used in the bedding industry to finish the top and bottom edges of the mattress. The machine stitches the top and bottom panels of mattress to the mattress edge and covers the raw edge with a protective tape or ribbon.

FEATURES:

• Double lock, heavy duty lockstitch sewing head up to 3.000 stitches per minute.
• Knee control or operator carrier.
• Auto slowly down at corners.
• Fast and precise running.
• Variable speed straight line control and corner speed facility.
• Adjustable table height with electric motor.
• Adjustable sewing head height and angle with electric motor.

SPECIFICATIONS:

• Sewing Head: Pfaff 335 lockstitch
• Carriage Motor: 1.5 Kw
• Mattress Height: min. 5cm / max. 40cm
• Sewing Head Motor: 0.37 Kw
• Table Motor: 0.37 Kw
• Needle: No.24
• Thread (up/down): 50/120
• Total Area Required: 2.520mm x 2.020mm
• Weight: 605 kg
• Power Requirement: 380 V 3 Phase 3 Kw
• Standard Table Size: 1.550 x 2.050mm

Ümit Makina K-40 Automatic Tape Edge Machine is a type of automatic sewing machine used in the bedding industry to finish the top and bottom edges of the mattress. The machine stitches the top and bottom panels of mattress to the mattress edge and covers the raw edge with a protective tape or ribbon.

FEATURES:

• CTEC 300UB5 chain stitch sewing head up to 4.000 rpm
• Parker servo driven sewing head
• Patented flip over system
• Full automatic control and settings via touchscreen panel
• Auto slow down and adjustable speed at corners
• Electronic needle positioning
• Rugged steel frame construction for heavy mattresses up to 85 kg
• 5 - 45cm beds sewn with ease

SPECIFICATION:

• Sewing Head: CT 300UB5 / PFAFF 5625
• Sewing Head Speed: C-Tec 300UB5 : 4.000 rpm / PFAFF 5625 : 3.500 rpm
• Output Capacity (mattress / 8 hours): 160 – 240
• Needle Size: No.24
• Thread (up/down): 50/50
• Mattress Height: min. 5cm / max. 45 cm
• Sewing Head Motor: 220 V Servo Motor
• Sewing Head Angel Motor: 380 V AC Motor
• Total Area Required: 4620 mm x 3752 mm
• Weight: 1.355 kg
• Power Requirement: 380 V 3 Phase 4,5 Kw
• Air Consumption: 400 lt./min.
• Compressed Air: 6 bar

UMIT MAKINA-K20 Mattress Tape Edge Machine

Ümit Makina K-20 Mattress Tape Edge Machine is used in the bedding industry to finish the top and bottom edges of the mattress. The machine stitches the top and bottom panels of mattress to the mattress edge and covers the raw edge with a protective tape or ribbon.

FEATURES

• Double lock, heavy duty chain stitch sewing head up to 4.000 stitchs per minute.
• Knee control or operator carrier.
• Auto slow down at corners.
• Fast and precise running.
• Variable speed straight line control and corner speed facility.
• Adjustable table height with electric motor.
• Undertable electric supply cabinet with carriage knee control system.
• Adjustable sewing head height and angle with electric motor.

SPECIFICATIONS

• Sewing Head: CT 300UB5
• Mattress Height: min. 5cm / max. 40 cm
• Carriage Motor: 1.5 Kw
• Sewing Head Motor: 0.37 Kw
• Table Motor: 0.37 Kw
• Needle: No.24
• Thread (up/down): 50/50
• Total Area Required: 2.520 mm x 2.020 mm
• Weight: 584 kg
• Power Requirement: 380 V 3 Phase 3 Kw
• Standard Table Size: 1.550 x 2.050 mm

ARP-20 is a Full Automatic Mattress Roll Packing Machine. The mattress is moved by the conveyer, wrapped, and compressed by adjustable hydraulic pressure up to 60 tons; it is then sealed and rolled, ready to be shipped anywhere in the world. ARP-20 can be used as a standard wrapping machine without having the mattress rolled. According to the user's preference, the multi-directional conveyers can either send the mattress to the rolling unit or to the wrapped only mattress area.

FEATURES:

• User friendly touchscreen panel for all machine settings.
• Fully automated double sealing heating bars.
• Up to 60 tones hydraulic press.
• Motion control unit with servo motor driven system.
• 2 mattresses / min. / 960 mattresses 8hrs.
• 2 operation modes; Regular mattress packing and Roll pack.
• Automatic size adjustment.
• Trim removal kit.
• Zero fold to prevent material damage.

SPECIFICATIONS:

• Mattress per min.: 2
• Minimum Mattress Height: 10 cm
• Maximum Mattress Height: 38 cm
• Minimum Mattress Width: 75 cm
• Maximum Mattress Width: 210 cm
• Nylon Thickness: 0.1 micron
• Maximum Nylon Width: upper 2800 mm/ lower 2700 mm
• Exit Diameter: 30cm
• Maximum Pressure: 48 -60 Ton
• Weight: 8200 kg
• Power Requirement: 380 V 3 Phase 20 Kw
• Compressed Air: 6 Bar
• Shipping Dimensions: 5500 x 9000 x 2750 mm

UMIT MAKINA-D-20 AUTOMATIC WIRE STRAIGHTENER MACHINE

D-20 Automatic Wire Straightened Machine produces straightened wire pieces of any length by programming of the length of each wire frame and the number of pieces which is done by user friendly touch screen panel. Machine comes with a electronic cutting adjustment and does not require any operator during operation.

FEATURES

• Produces Straightened wire pieces of any length.
• Programming of the length of each frame and the number of pieces is done by touch screen panel and up to 7 different sizes can be stored.
• Electronic cutting adjustment.
• No operator is needed during production.
• No time loss while changing sizes.
• Ease of calibration with highly sensible encoder counter in any wire size (+/- 1 mm).
• Cutting press runs only with wire.
• Energy saving design and minimized cutting press wearing.
• Inverter controlled system.
• Optional bending mechanism.